SLA

Clear Cast Resin

3D print accurate, low ash patterns for investment casting directly in house.

Clear Cast Resin is a resin designed for investment casting, to directly print patterns that can be invested and cast. It has an extremely low thermal expansion, low ash, and no trace heavy metals.

Clear Cast Resin, paired with a latticing software, is recommended for use with larger parts, excelling at producing geometries thicker than 3 mm.

  • Accessible pattern production in-house
  • Clean Burnout
  • Low Thermal Expansion
  • Accurate and Versatile
  • Built from Experience

Formlabs Resin Washing Solution (5 L)

The next-gen part cleaning solution – cleans as well as IPA, lasts twice as long, and is safe enough for any workspace

Formlabs Resin Washing Solution is a non-flammable* solution for cleaning resin off of 3D printed parts. This solution cleans as well as IPA, but can dissolve twice as much resin before becoming saturated. Reduce wash replenishing and cost per washed part with a part-cleaning solution safe enough for any workspace.

Formlabs Resin Washing Solution is recommended with the Form Wash (2nd Generation) and Form Wash L.

  • Stable and Cost-Effective
  • Longer Solution Lifetime
  • Validated Non-Flammable
  • Simplified Sourcing

BEGO™ VarseoSmileⓇ TriniQⓇ Resin

For versatile permanent and provisional restorations

BEGOTM VarseoSmileⓇ TriniQⓇ Resin is a versatile ceramic-filled biocompatible material, indicated for temporary and permanent single units (crowns, inlays, onlays, and veneers) and bridges, and denture teeth.

BEGOTM VarseoSmileⓇ TriniQⓇ Resin is the first 3D-printed resin indicated for permanent bridges and has excellent accuracy, translucency, and an efficient workflow.

Available in three VITA shades (A2, A3, B1).

  • Unmatched Versatility
  • Superior Accuracy
  • Streamlined Workflow
  • Formlabs’ Award-Winning Ecosystem

Form Wash L Universal Build Platform Adapter

A user-replaceable backplate for Form Wash L that enables compatibility with Form 2, 3, and 4 series Build Platforms. Easily adjust between washing a maximum of two desktop-sized Build Platforms or one large format Build Platform.

SLS

Fuse Blast Polishing System

Fuse Blast Polishing System is a drop-in upgrade for the Fuse Blast to get a smooth, semi-gloss, and dye-ready finish for SLS parts.

The Fuse Blast Polishing System is a drop-in upgrade to the Fuse Blast that allows users to add a smooth, semi-gloss, scuff-resistant, and dye-ready surface finish to their SLS printed parts. With the Polishing System, users can create parts for consumer-facing, end-use applications with improved feel and appearance.

This single-step add-on to the Fuse Blast both cleans and polishes your parts straight from the Fuse Sift without the need for another Blast.

  • Consumer-Ready Parts
  • Frictionless Adoption
  • Reliable Outcomes
  • Low-Cost Solution

Fuse Blast Polish Module

Buy Fuse Blast Polishing Module, a drop-in upgrade for the Fuse Blast to get smooth, semi-gloss, and dye-ready finishes for SLS parts.

The Polishing Module is an add-on for the Fuse Blast media blaster that delivers consumer-ready parts with a smooth, semi-gloss, and dye-ready surface finish in one automated step.

For use with the Fuse Blast Polishing System.

Fuse Blast Polishing Media

Fuse Blast Polishing Media consists of specially formulated plastic beads for media blasting to get smooth, semi-gloss, and dye-ready finishes for SLS parts.

Fuse Blast Polishing Media consists of specially formulated plastic beads for use on the Fuse Blast to deliver smooth, semi-gloss, and dye-ready SLS parts.

The Polishing Media smooths parts by compacting the surface, unlike abrasive polishing or chemical surface melting. It is designed for longevity, lasting for over a hundred Blast cycles, while resisting the breakdown that occurs with glass media. The Polishing Media is larger and propelled at higher pressures than standard glass media.

For use with the Fuse Blast Polishing System.

Fuse Blast Polishing Agent

Fuse Blast Polishing Agent is a solution that conditions the Polishing Media to get smooth, semi-gloss, and dye-ready finishes for SLS parts.

The Fuse Blast Polishing Agent conditions the Fuse Blast Polishing Media to improve polishing quality and prevent media clogging. The Polishing Agent is a liquid solution that is diluted with water in the Polishing Module water tank. 7mL of agent diluted in 750mL of water will last approximately 6 hours of blasting.

For use with the Fuse Blast Polishing System.

Fuse Sift Glovebox Bundle

Workspace-Friendly SLS 3D Printing: Fuse Sift Glovebox Bundle Offers a Fully Enclosed SLS Workflow

Make your SLS Workflow workspace-friendly with the Fuse Sift Glovebox Bundle, a comprehensive solution that combines the Fuse Sift Glovebox Panel and Fuse Parts Carrier to streamline your part extraction workflow and minimize powder exposure.

  • Improved workspace and operator cleanliness thanks to the only SLS powder recovery station with a fully contained work environment.
  • Faster part extraction with a fully contained environment allows you to extract parts without caution, enabling a quicker and more efficient workflow.
  • Ergonomic workflow with the thin gloves that provide improved dexterity and comfort.
  • Consistent ecosystem and user experience with parts carrier inserting seamlessly to build chamber compartment of Fuse Sift.

Fuse Sift Glovebox Panel

Enhance your part extraction process with the Fuse Sift Glovebox Panel, an accessory designed to enable an enclosed workspace for the Fuse Series ecosystem. It easily installs onto the Fuse Sift, creating a contained environment that eliminates dust exposure and ensures an ergonomic workflow. This innovative design protects the operator and the surrounding workspace from unwanted powder dispersion.

Fuse Parts Carrier

The Fuse Parts Carrier is a container designed for powder-free part collection when used with the Fuse Sift. Simply slide it into the build chamber enclosure after part extraction to seamlessly transfer parts without opening the glovebox to maintain an enclosed environment and clean workstation.

Fuse Sift Funnel

The Fuse Sift Funnel is a drop-in attachment on any Fuse Sift to maintain a clean workstation while loading fresh SLS powders with the 10kg Powder Bag packages.

Nylon 12 Powder Packaging changes

Brief reasoning for the change:

  • Green Reasoning: 83% reduction in plastic packaging; curbing 10s of thousands of jugs not going to landfills each year.
  • UX Reasoning: Easier disposal for customers; jugs are bulky and customers have communicated grief of them piling up.
  • Business Reasoning: 10kg bags are industry standard and this is an opportunity to reiterate 30% savings on orders of 1000 kg or more.

Fuse 1+ Production Package

Maximize your throughput with this production-ready setup using three printers, the powder management station, and the automated media blaster, along with a 2 month supply of Nylon 12 Powder as a comprehensive solution for continuous production of SLS parts.

Contact Us Now

Drop a mail to us at

formlabs@beacon-india.com

GET YOUR QUOTE

& KNOW ABOUT Formlabs 3D Printing Accessories

request a quote

NEWSLETTER SIGN-UP